Mitsubishi Electric Lossnay LGH-100RX3-CAN Technical Manual page 129

4.6.4 When Using the LONWORKS
to Connect to LONWORKS
®
By using the LON adaptor (model name: LMAP02-E), it is possible to control and observe Lossnays on a building management
system using the LONWORKS
* For specifications and functions of the LON
Table of Functions
ON/OFF
Change fan to High/Low
Operation
Change ventilation mode
Local prohibit ON/OFF
Operation condition
Fan speed
Ventilation mode (conditions)
Observation
Errors
Filter maintenance sign
Local prohibit ON/OFF state
System Example
(Using M-NET)
Connect the M-NET transmission cable to TB5 A,B of the Lossnay terminal block. (Refer to page 165).
The Lossnay remote controller (PZ-41SLB-E) can not be used with this system.
Up to 50 units can be connected with 1 LMAP02-E (The LGH-200RX type should be counted as two).
For details about the system or connection cables of the LMAP02-E, refer to the technical materials, etc., regarding the
LMAP02-E.
®
* LONWORKS is a registered international trademark, registered in the U.S.A to the Echelon Corporation.
126
®
.
®
adaptor, refer to the materials regarding the LONWORKS
Contents
Building
management
system
®
LONWORKS
®
Compatible Adaptor (LMAP02-E)
®
Individual Lossnay
(Lossnay not set
for interlocked
operation)
«
«
«
«
«
«
«
«
«
«
M-NET
LMAP02-E
Lossnay
Lossnay M-NET
remote controller
PZ-52SF-E
LMAP02-E
Lossnay
M-NET
Lossnay M-NET
remote controller
PZ-52SF-E
®
compatible adaptor.
Interlocked Lossnay
(Lossnay set for
interlocked opera-
tion with City Multi)
Lossnay
Lossnay M-NET
remote controller
PZ-52SF-E
Lossnay
Lossnay M-NET
remote controller
PZ-52SF-E
×
×
×
×
×
×
×
«
×
×