GE ApexPro Operator's Manual page 188

Maintenance
Biocompatibility
Supplies
Inspection
C-2
When used as intended, the parts of the product described in this operator manual,
including accessories that come in contact with the patient during the intended use,
fulfill the biocompatibility requirements of the applicable standards. For more
information, contact your local sales/service representative.
To ensure patient safety, use only supplies manufactured or recommended by GE. For
more information, contact your local sales/service representative.
An effective maintenance schedule should be established for your monitoring
equipment and reusable supplies. This should include inspection as well as general
cleaning on a regular basis. The maintenance schedule must comply with the policies
of your institution's infection control unit and/or biomedical department.
CAUTION
Failure on the part of the responsible hospital or institution
employing the use of this monitoring equipment to implement a
satisfactory maintenance schedule may cause undue equipment
failure and possible health hazards.
Check with your biomedical department to be sure preventive maintenance and
calibration is complete. Qualified service personnel should repair or replace damaged
equipment or reusable supplies. Refer to the appropriate service manuals for detailed
maintenance and repair information.
Use the following guidelines when inspecting the equipment:
Inspect the equipment for obvious physical damage.
Inspect all cords for fraying or other damage.
Inspect all plugs and connectors for corrosion, contaminants, bent prongs or pins.
Inspect all cable insulation for cracks, tears, or other damage.
In the U.S., GE Service is available 24-hours a day by calling 800-558-7044. Outside
the U.S., please contact your local sales/service representative.
NOTE
Refer to the appropriate service manuals for more comprehensive checkout
procedures.
ApexPro™ 2001989-200E