GE ApexPro Operator's Manual page 112

Viewing real-time patient data
7-4
NOTE
You cannot change the Alarm Control or parameter control settings of an
out-of-unit patient.
Adjust the real-time trend window for any in-unit patient.
real-time trend window on page 7-6.
Print real-time parameter data and waveforms for any in-unit patient.
Printing real-time data on page 7-8.
The single patient viewer displays menu bar options similar to the following:
Single patient viewer menu bar options
Option
Real-Time View
Admit
Monitor Setup...
Patient Data...
System Utilities...
View all ECG
Sample
Relearn
Configuration
ApexPro™
Function
Return to the real-time display of patient data.
Display the Admit window.
Temporarily adjust a patient's parameter, alarm, or print
control settings.
Display stored patient data. See Chapter 8.
Access web access server data.
Display waveforms for ECG leads I, II, III, V, aVR, aVL, and
aVF. If a 6-leadwire set is connected, Vb waveforms also
display.
Record and store a 10-second sample of a patient's real-time
ECG data. Data samples are stored in Events directory.
Monitor: Parameter numeric data and up to three
waveforms.
Telemetry: ECG waveforms only.
Relearn the selected patient's ECG rhythm after changes
occur to heart rate or rhythm. The CIC Pro center uses 14
current complexes to relearn the patient's ECG pattern.
The heart rate value appears briefly as Xs during the relearn
process and returns to numerics when the relearn process is
complete.
Configure the selected patient's real-time trend window.
Configuring the real-time trend window on page 7-6.
See Configuring the
See
060A
See
2001989-200E