Single Patient Viewer - GE ApexPro Operator's Manual

Single patient viewer

2001989-200E
Multi-patient viewer menu bar options
Option
Auto Display
View Other
CIC Setup
Silence Alarms
Graph All
Browser
The single patient viewer displays detailed real-time parameter data for a selected
patient. You can complete the following tasks from the single patient viewer:
View detailed real-time parameter data.
View, change, or print Alarm Control or parameter control settings for any in-
unit patient. These changes are also adopted by the monitor.
control settings on page 5-8. See Adjusting parameter control settings on page 7-
11.
View Alarm Control or parameter control settings for out-of-unit patient beds on
the Unity Network. See Adjusting alarm control settings on page 5-8. See
Adjusting parameter control settings on page 7-11.
ApexPro™
Viewing real-time patient data
Function
When enabled, the Auto Display button is selectable from the
menu bar.
Clicking the Auto Display button while viewing the multi-
patient viewer automatically completes the following tasks:
Removes any un-locked, unoccupied beds.
Adds at least one empty patient window with an Admit
button.
Resizes the remaining patient windows to maximize the
amount of displayed patient data.
View any patient bed on the Unity Network that is inside or
outside of the care unit, floor, or hospital.
beds on page 7-5. See Out-of-unit patient beds on page 7-6.
View the CIC Pro center default settings. You can customize
some of the user-level defaults.
on page 4-4.
Silence audible alarm tones for one minute.
alarms on page 5-7.
Print the parameter limits or the waveform data for all patients
in the care unit.
Access stored patient data from the web access server.
059A
See In-unit patient
See Customizing the system
See Silencing
See Adjusting alarm
7-3