Manual Information; Purpose; Intended Audience; Related Documents - GE ApexPro Operator's Manual

Introduction

Manual information

Purpose

Intended audience

Related documents

Conventions used

Equipment terms

1-2
This manual contains the instructions necessary to operate the ApexPro telemetry
system safely and in accordance with its function and intended use.
It also contains limited instructions necessary to operate the telemetry system when
used with the CIC Pro Clinical Information Center. For more information, refer to
Related documents on page
This manual is intended for clinical professionals. Clinical professionals are expected
to have a working knowledge of medical procedures, practices, and terminology, as
required for monitoring of critically ill patients.
This manual assumes that you are familiar with the operating procedures of the CIC
Pro Clinical Information Center. It uses the CIC Pro software version 5 (or later) user
interface for procedures, navigation and illustration purposes.
If your system uses an earlier CIC Pro software version, you may notice minor
discrepancies between what you see on the equipment and the information presented
in this manual. Refer to the documentation provided with your system for the most
accurate operator's and service instructions.
This manual uses the following terms to simplify common equipment names.
Term
CIC Pro center
Monitor
Printer
Transmitter
Writer
ApexPro™
1-2.
Description
Refers to the CIC Pro Clinical Information Center.
Refers to a bedside monitor, transport monitor, blood pressure
monitor, or a wireless monitor on the Unity Network.
Refers generically to a direct digital writer or a laser printer.
Refers to the ApexPro and/or ApexPro CH transmitter.
Refers to the PRN 50-M digital writer.
2001989-200E