GE ApexPro Operator's Manual page 149

Deleting a stored event or data sample
Viewing or printing an Event strip
2001989-200E
4. Use the scroll bar to move up or down through the list of events and data
samples.
NOTE
Deleting an event or data sample from the CIC Pro center Events directory
also deletes the corresponding data from the monitor or telemetry system.
When the Patient Data Server (PDS) is active, the delete events button is
dimmed and you cannot delete any events or data samples from the Events
directory.
To delete a stored event or data sample, use the
with the red X.
Complete the following procedure to delete an event or data sample stored in the
Events directory:
1. From the single patient viewer, click Patient Data... > Events. The Events
directory displays.
2. Sort the data by event time or by event type.
3. Use the scroll bar to move up or down through the list of events and data
samples.
4. Click the single event or data sample you want to delete, or hold down CNTRL
and continue to click the left mouse button to select multiple events or data
samples.
5. Click the (delete event button). This button is located under the Events
directory and has a red-colored X on it. A window displays a message similar to
the following, Are you sure you want to delete this event?
6. Verify you selected the correct event or data sample for deletion:
Click OK to delete this event or data sample.
Click Cancel if you do not want to delete this event or data sample.
You can view or print a maximum of a 10-second strip for any arrhythmia event or
ECG data sample stored in the Events directory. You can also view or print the current
and reference ST complexes for all available ECG leads.
The following is an example of an Event Strip.
ApexPro™
Viewing stored patient data
(delete event button)
8-5