Access - Panasonic EBL512 Operating Instructions Manual

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
22
Action

"Access"

Enter the code (4 digits)
Rev: 1
Access
To be able to use the key pad in the control unit (to get access to the
menu tree), it is necessary to login with an access code for level 2 ,3
or 4.
See also chapter "Access levels", page 21.
Open the door in the control unit (= level 1), press the "Access" button
(P8) and continue as follows:
Text in display
Access code: _
Access code: ∗∗∗∗
NO ACCESS!
Perform monthly test
Explanations:
Action (in the table) = use push button / key (e.g. signed "Access").
Text in display (in the table) = what is shown in the alphanumeric
display in the control unit (c.i.e.).
Comments (in the table) = Comments to the text in the "Action" and
"Text in display" columns.
Use "↑" and "↓" to scroll between the main menus H1-H10.
Use "A" to accept.
Some main menus have sub menus.
between the sub menus (e.g. B1-B9). Use "A" to accept.
NOTE! The menus are circular, i.e. if you scroll with "↓" and the last
menu is reached, the first menu comes up next.
Quick jump can be used within each menu, e.g. in menu H1 press "6"
for a quick jump to menu H6. "1" and "0" (within 1 sec.) = 10.
Instead of a menu identification (e.g. B1), the letter L can be shown,
which means that it is a List. Use "↑" and "↓" to scroll in the list.
Use "←" and "→" to move the cursor in a menu.
Use "Return" to return from a sub menu to the main menu (H1-H10).
Use "Return" to log off from a main menu (H1-H10).
There will be an automatic log off 60 minutes after the last action (i.e.
if the key pad / a push button has not been used for 60 min.).
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT? H1
72
Comments
The digits are replaced
(∗∗∗∗) in the display.
The access code was not
correct. Try again.
The access code was
correct. This is menu H1.
Press "A" to accept (to
perform monthly test) or
scroll / jump to the follow-
ing menus (H2-H10).
Use "↑" and "↓" to scroll