Panasonic EBL512 Operating Instructions Manual page 122

Panasonic Electric Works Fire & Security Technology Europe AB
MEW00748
30.2
Action
"Access"
"A"
"A"
Rev: 1
Disable or re-enable outputs for routing
equipment (H8/S1)
Outputs for routing equipment (fire brigade tx / fault tx) can be
disabled via this menu. They stay disabled, until re-enabled again via
this menu. Can be useful during an installation test period, when only
local alarms are required.
Disabled outputs are indicated by LEDs "Disablements" (L8) and
"Fault / Disablements Fire brigade tx" (L15).
Disabled outputs are listed in menu H4/U1.
Text in display
Disable or re-enable outputs for
routing equipment
Routing equipment for FIRE:1, FAULT:1
(1=enabled, 0=disabled)
Disable or re-enable outputs for
routing equipment
Operating Instructions Fire alarm system EBL512 V2.3.x
ACCEPT?
ACCEPT?
ACCEPT?
120
Comments
According to chapter
"Access code for
maintenance", see page
119.
S1
To move the cursor, press
"→". Edit and/or press "A"
to accept.
Scroll or press "Return" to
return to H8. Scroll or
S1
press "Return" to log off.