Blomberg DSM 1510 Instruction Manual page 14

GB
REPOSITIONING THE DOORS
1- Switch off at the socket outlet and pull out the mains plug.
2- Remove all food, loose items and fittings from the appliance and door shelves.
3- Unscrew the bolts and remove the middle hinge while holding doors. (1)
4- Remove the freezer compartment door from the top hinge by sliding down and
pulling front. (2)
5- Remove the fresh food compartment door by pulling up. (3)
6- Remove the plastic covers on the front top trim. (4)
7- Unscrew the bolts of the top hinge and remove top hinge. (5)
8- Reposition plugs on the opposite side. (6)
9- Carefully lay the appliance on its back. (7)
(You may need somebody to help you.)
10- Unscrew and remove the left hand side front feet. (8)
11- Unscrew and remove the bottom hinge. (9)
Reposition the plastic covers on top of fresh food door to the opposite
12-
side.
(10)
13- Unscrew and remove the middle hinge bushing from freezer door. (11)
14- Screw and fix the new middle hinge bushing which is supplied in IB bag to
the other side. (12)
15- Reposition the hinge bushing and the tap on the fresh food door. (13)
16- Unscrew and reposition the bottom hinge bushing. (14)
Fit the bottom hinge, if necessary adjust and tighten the bolts (15)
17-
18- Fit the other feet and tighten the screws. (16)
19- Rotate the top hinge 180°. Unscrew the hinge pin and re-tighten it to the
opposite side. (17)
20- Fit the top hinge and tighten the bolts. (18)
21- Fit the plastic cover on the front top trim. (19)
22- Locate the fresh food door to the bottom hinge and attach to the cabinet. (20)
23- Locate the middle hinge on the fresh food door (21) and put the freezer door
between the top and middle hinge carefully. (22)
24- Fit the middle hinge. Adjust the doors and tighten the bolts. (23)
25- Carefully stand your appliance (you may need somebody to help you) adjust
the front feet.
26- Remove the plastic plugs on the doors. Unscrew the door handles. Reposition
the door handles on the other side. Tighten the screws and fit the plastic
plugs. (24)
27- Put back all, loose items and fittings.
28- Wait for at least 4 hours to allow the system to settle before switching on.
Instruction Manual
9
(Fig. 9)