FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
4.3 Installing a FusionCol8000-E
4.3.1 Unpacking and Checking
Procedure
Step 1 Verify that the package is intact. If any damage is found, notify the carrier
immediately.
Step 2 Remove the plastic packaging materials.
Step 3 Check the types and quantity of fittings according to the fitting list. If any fitting is
missing, contact Huawei technical support.
----End
4.3.2 Securing a Smart Cooling Product
Context
Figure 4-4 Ports reserved for combining with a corridor module
(1) Reserved port for combining units on the
end
Procedure
Step 1 Connect the hoisting ropes and hoist the equipment to the installation area.
Issue 01 (2021-01-30)
Copyright © Huawei Technologies Co., Ltd.
4 System Installation (FDC Scenario)
(2) Reserved port for combining units on the
side
67