Initial Configuration; Setting Temperature And Humidity Values And (Optional) Enabling T/H Sensors - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
No.
6
7
8
9
10
11

6.4 Initial Configuration

Log in as the admin user (preset password: 000001) when setting initial
parameters.
6.4.1 Setting Temperature and Humidity Values and
(Optional) Enabling T/H Sensors
Prerequisites
●
●
Issue 01 (2021-01-30)
Items
The current minor
alarm and their
quantity
The current warning
alarm and their
quantity
The status bar
The alarm bar
Login button/Logout
button
Teamwork control
button
The T/H sensors outside the cabinet need to be enabled when they are
installed, otherwise, skip
This section describes how to enable Cold aisle sensor 1.
Copyright © Huawei Technologies Co., Ltd.
Note
refers to the current major alarm and
their quantity.
refers to the current warning alarm and
their quantity.
-
You can tap
bar to enter the active alarm screen that
displays all active alarms.
indicates that you have not
logged in to the system, and can tap the icon
to log in.
logged in to the system as admin or operator
user, and can tap the icon to log out.
indicates that there is no teamwork
control at present.
is teamwork control without alarms at
present. indicates that there is
teamwork control with alarms at present.
Step 2.
6 Power-On Commissioning
in the alarm
indicates that you have
indicates that there
100