Replacing An Air Exhaust Ntc Temperature Sensor (Building Scenario) - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
8.4.9 Replacing an Air Exhaust NTC Temperature Sensor
(Building Scenario)
Prerequisites
●
●
●
Procedure
Step 1 On the controller home screen, tap Shutdown and turn off the device switch in
the PDF.
Exercise caution because the device is still energized after it is shut down on the
controller home screen.
Step 2 Open the adjustable side panel.
Step 3 Remove the sealing plate from the exhaust fan.
Figure 8-15 Removing the sealing plate from the exhaust fan
Issue 01 (2021-01-30)
An NTC temperature sensor needs to be replaced.
A spare NTC temperature sensor of the same model is available and
functional.
Tool: Phillips screwdriver
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
152