Replacing A Water Pump - Huawei FusionCol8000-E240 User Manual

FusionCol8000-E240 Modular Indirect Evaporative
Cooling System
User Manual
Figure 8-32 Removing a float
(1) Water tank cover
Step 6 Install the new float and tighten the float to a torque of 5 N·m. Connect the float
interconnection terminal.
Step 7 Power on the device and tap Start on the home screen. Ensure that the device is
running properly without generating alarms.
Step 8 Install the adjustable side panels.
----End

8.4.18 Replacing a Water Pump

Prerequisites
●
●
●
Before replacing the water pump, drain water from the water tank completely.
Procedure
Step 1 On the controller home screen, tap Shutdown and turn off the device switch in
the PDF.
Issue 01 (2021-01-30)
A water pump needs to be replaced.
A spare water pump of the same model is available and functional.
Tools: flat-head screwdriver, Phillips screwdriver, socket wrench
NO TICE
Copyright © Huawei Technologies Co., Ltd.
8 System Maintenance
(2) Float
175