Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Rear-Facing Imager Bezel Assembly
Description
ASSY,HSG,REAR,BLACK,L5,SINGLE SIM SLT
ASSY,HSG,REAR,BLACK,L5
REAR-FACING IMAGER BEZEL ADHESIVE
ASSY,BZL MN IMAGER,SILVER
ASSY,BZL MN IMGR
NOTE
Perform steps 1-3 only if the Rear-Facing
Imager Bezel Adhesive is not already
assembled to the Rear-Facing Imager Bezel.
1.
Remove the adhesive liner from the Rear-
Facing Imager Bezel Adhesive.
2.
Place the Rear-Facing Imager Bezel
Adhesive onto the Rear-Facing Imager Bezel,
aligning the notches in the Adhesive to the
notches in the Bezel.
3.
Press down on the Rear-Facing Imager Bezel
Adhesive for 5 seconds to secure it to the
Bezel.
4.
Remove the remaining adhesive liner from the
Rear-Facing Imager Bezel Adhesive.
5.
Place the Rear-Facing Imager Bezel onto the
Rear Housing, over the Rear-Facing Imager
Lens.
PAGE 90
Reference #
3
--
37
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
