Moto G (4th Generation)
Level 2 – Service and Repair Manual
Headset Jack Removal
NOTE
The Headset Jack and Headset Jack
Grommet can be recovered and
reused after removal.
1.
Use the Tweezers to remove the Kapton Tape
from the Headset Jack ZIF Connector Door.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Use the flat end of the Blackstick to open the
Headset Jack ZIF Connector Door.
3.
Use the Tweezers to disconnect the Headset
Jack Flex from the Headset Jack ZIF
Connector.
4.
Use the Tweezers to remove the Headset
Jack Grommet.
PAGE 33
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola