Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Battery Removal
/// WARNING ///
Failure to adhere to Safety Critical Note(s) may
increase risk of rupture, burning, or failure to function
safely when used by the customer. Refer to the Battery
Safety Guidelines.
NOTE
The Battery can be recovered and
reused after removal.
1.
Use the Plastic Tweezers to slowly peel the
Thermal Spreader from the PCB and Battery,
starting in the lower left corner on the Battery.
NOTE
After you remove the Thermal
Spreader, you cannot reuse it.
2.
Use the Plastic Tweezers to remove the
Kapton
Tape from across the Battery Wire,
®
starting at the Shield side.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
PAGE 29
// CAUTION //
Handle the Battery Pack with care. If dropped to the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and throughout
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
