Front-Facing Imager Removal - Lenovo motorola Moto G Service And Repair Manual

Moto G (4th Generation)
Level 2 – Service and Repair Manual

Front-Facing Imager Removal

NOTE
The Front-Facing Imager can be
recovered and reused after removal.
1. Use the Tweezers to remove the Kapton Tape
from the Front-Facing Imager ZIF Connector
Door.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2. Use the flat end of the Blackstick to open the
Front-Facing Imager ZIF Connector Door.
3. Use the Tweezers to disconnect the Front-
Facing Imager Flex from the Front-Facing
Imager ZIF Connector.
4. Lift the Front-Facing Imager out of the pocket
of the Front Housing.
PAGE 32
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola