Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Front-Facing Imager Assembly
Description
ASSY,HSG,FRNT,WHT
ASSY,HSG,FRNT,BLK
ASSY,CAMR,5MP,FRONT IMGR
PAD,CONDUCTIVE,FRONT FACING IMGR FLX
SPRT,FRNT FACING IMGR
1.
Remove the protective liner from the Front-
Facing Imager if present.
2.
Insert the Front-Facing Imager Flex into the
Front-Facing Imager ZIF Connector.
3.
Slide a fingertip across the Front-Facing
Imager ZIF Connector Door to close it.
4.
Place Kapton Tape over the Front-Facing
Imager ZIF Connector Door.
5.
Press down on the Front-Facing Imager until
it snaps into the pocket of the Front Housing.
PAGE 77
Reference #
1
16
--
--
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
