Pcb Cleaning - Lenovo motorola Moto G Service And Repair Manual

Moto G (4th Generation)
Level 2 – Service and Repair Manual

PCB Cleaning

1. Use the Blackstick and ISP Alcohol to remove
any remaining adhesive from where the
Thermal Spreader and Copper Tape attach to
the PCB over the Display Flex BtB Connector.
2. Use the Blackstick and ISP Alcohol to remove
any remaining adhesive from where the
Kapton Tape attaches to the PCB Shield over
the Battery Wires.
3. Use the Blackstick and ISP Alcohol to remove
any remaining adhesive from where the
Battery Wire Block attaches to the PCB.
4. Use the Blackstick and ISP Alcohol to remove
any remaining adhesive from where the
Loudspeaker Pads attach to the PCB.
PAGE 49
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola