Moto G (4th Generation)
Level 2 – Service and Repair Manual
Rear-Facing Imager Removal
NOTE
The Rear-Facing Imager can be
recovered and reused after removal.
1.
Use the Tweezers to remove the Kapton Tape
from the Rear-Facing Imager ZIF Connector
Door.
NOTE
After you remove the Kapton Tape, you
cannot reuse it.
2.
Use the flat end of the Blackstick to open the
Rear-Facing Imager ZIF Connector Door.
3.
Remove the Rear-Facing Imager from the
Rear-Facing Imager ZIF Connector.
PAGE 40
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola