Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Thermal Spreader, Copper Tape, and Kapton Tape Removal
NOTE
Remove the Thermal Spreader,
Copper Tape, and Kapton Tape only if
they are damaged. After you remove
them, you cannot reuse them.
1.
Use the Plastic Tweezers to remove the
Kapton Tape from the inner edge of the PCB
near the Display Flex BtB Connector.
2.
Use the Plastic Tweezers to slowly peel the
Copper Tape and Thermal Spreader from the
PCB. Start with the corner of the Copper Tape
closest to the outside edge of the PCB.
PAGE 45
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
