Table of Contents
Advertisement
Moto G (4th Generation)
Level 2 – Service and Repair Manual
Display Adhesive Assembly
Description
DIE CUT,ADHES,MN LENS,PSA
ASSY,HSG,FRNT,WHT
ASSY,HSG,FRNT
1.
Use cotton swabs and ISP Alcohol to clean
the Display bonding ledge, Top Frame, and
Bottom Frame. The Display bonding ledge is
highlighted in the photo.
// CAUTION //
Display bonding ledge, Top Frame, and Bottom
Frame cleaning is critical to the phone's water
resistance. You must thoroughly clean the
surfaces with ISP Alcohol and allow it to dry
completely before applying 3M AP-111
Adhesion Promoter.
2.
Wait for the ISP Alcohol to dry completely.
// CAUTION //
Do not use the same cotton swabs to clean
with ISP Alcohol and apply 3M AP-111
Adhesion Promoter. The Display will not
properly adhere to the Front Housing if the
cotton swabs are reused. The cotton swabs
may be used for 2 applications but then must
be discarded.
3.
Use cotton swabs to apply 3M AP-111
Adhesion Promoter to the Display bonding
ledge.
4.
Wait for the 3M AP-111 Adhesion Promoter to
dry.
PAGE 115
Reference #
1.2
1.3
Motorola Mobility Confidential Restricted:
Do not share without consent from Motorola
Advertisement
Table of Contents
