Configuration (Ma5603T) - Huawei SmartAX MA5600T Hardware Description

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Figure 1-31 Configuration of the N66E-18 cabinet installed with one ETSI subrack and one
SPL subrack
NOTE

1.2.4 Configuration (MA5603T)

The N66E-18 dual-standard cabinet uses AC or DC power supply. This topic describes the
configurations of MA5603T in the cabinet.
NOTE
DC-powered Cabinet with Two MA5603T Chassis
Figure 1-32
chassis.
Issue 24 (2018-07-30)
l In Figure 1-31, the filled holes are for floating nuts to fasten subracks.
l Two power cables are configured for the ETSI subrack by default.
l Cabinet installation against the wall or back-to-back cabinet installation is not supported.
the MA5603T chassis is installed on the IEC side of the cabinet.
shows the configuration of the N66E-18 cabinet installed with two MA5603T
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Cabinet
39