Ah Battery - Huawei SmartAX MA5600T Hardware Description

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Table 6-39 Specifications of the SPD28SZ surge protector
No.
1
2
3
4
5

6.10 100 Ah Battery

This topic provides the overview, outline and specifications of the 100 Ah battery.
l Ensure that the polarity position of each battery is correct. The connection between
batteries and the power system/battery interface of the device must be firm and correct.
l When the device power supplied by the battery, it is suggested that powered on timely to
avoid the battery extended storage.
l When the device is power off, ensure that the battery switch is in the OFF state.
l After the device is powered on, the battery parameters need to be configured in time.
NOTE
Issue 24 (2018-07-30)
Item
Input feature
Output feature
surge protection
index
Over-voltage
protection
Alarm function
NOTICE
The appearance and weight of the battery are only for reference, which may differ from the actual
delivered battery.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Input rated voltage
Input frequency range
Input voltage range
Input rated current
Output voltage
Normal nominal discharge
current In
Maximum impact
throughput capacity Imax
Residual voltage Ur (8/20
µs, 20 kA)
Over-voltage protection
point
Return difference
Remote alarm function
Local alarm function
6 Electromechanical Device
Technical Requirement
Single-phase 220 VAC
47 Hz to 53 Hz
154 V to 286 V
30 A
154 V to 286 V
20 kA
40 kA
≤ 1300 V
275±5 V
5 V to 10 V
The remote output is the dry
contact digital signals. In
normal cases, the contact is
closed.
Indicated by the LED on the
front panel.
955