Huawei SmartAX MA5600T Hardware Description page 112

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Figure 2-10 Configuration of boards in the IEC service subrack
19
20
0
G
P
I
O
Table 2-16
Table 2-16 Boards in the IEC service subrack
Slot Type
Control board
slot
Uplink
interface
board (GIU)
slot
Power board
slot
Universal
interface
board (GPIO)
slot
Issue 24 (2018-07-30)
1 2 3 4 5
shows the configuration of boards in the IEC service subrack.
Slot
7,8
17,18
19,20
0
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Fan tray
6 7 8 9 10 11 12 13 14 15 16 17
Supported Board
Control board
Uplink interface board
Power board
Universal interface board -
2 Subrack and Chassis
Remarks
Two slots must be configured
with the same control board. You
are advised to configure 2
control boards working in active/
standby mode.
Mixed configuration of upstream
interface boards is supported;
however, it is recommended to
use the same upstream interface
board in the configuration.
It is recommended to configure
the same power board in the two
slots.
G
I
U
18
G
I
U
92