Huawei SmartAX MA5600T Hardware Description page 943

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Table 6-11 Main performance specifications of the C3-Type DC PDU
Item
Inpu
t
featu
re
Outp
ut
featu
re
Envi
ron
ment
Dimensions
NOTE
Issue 24 (2018-07-30)
Performance Specification
Rated input -48 V to -60 V DC
voltage
Input voltage -38.4 V to -72 V DC
Mode of input Two channels of DC input power. By default, the two channels of
power input power are provided by different power sources. To use the
same power source to provide two channels of input power,
connect a jumper to the terminal of each channel, as shown in
Figure
Maximum Maximum input current of each channel is 80 A.
input current
Input terminal M8 OT terminal
Rated output -48 V to -60 V DC
voltage
output voltage -38.4 V to -72 V DC
Output Eight channels of output power, controlled by four air breakers
channel (Each air breaker controls two channels of output power.)
Fixed current 40 A
of the air
breaker
Output Over-current protection. You need to restore the circuit manually.
protection
feature
Output Bare crimping terminal (12-10AWG).
terminal
Working -25 °C to 55 °C
temperature
Storage -40 °C to 70 °C
temperature
Relative <= 95%
humidity
Standard 70-106 KPa
atmospheric
pressure
2 U x 436 mm x 116.4 mm (Height x Width x Depth)
1 U = 44.45 mm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-10.
6 Electromechanical Device
923