Huawei SmartAX MA5600T Hardware Description page 941

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
l
l
l
l
l
NOTE
Output Terminal
Figure 6-12
Figure 6-12 Output terminals of the C3-type DC PDU
-48 V//-60 V Output Control Switch
Figure 6-13
Issue 24 (2018-07-30)
RTN1 (+) connects to RTN of the first channel DC power supply.
NEG1 (-) connects to NEG of the first channel DC power supply.
PGND connects to the ground cable.
RTN2 (+) connects to RTN of the second channel DC power supply.
NEG2 (-) connects to NEG of the second channel DC power supply.
By default, the two channels of input power are provided by different power sources. To use the same
power source to provide two channels of input power, connect a jumper to the terminal of each channel,
as shown in Figure 6-10.
shows the output terminals of the C3-type DC PDU.
shows the -48 V/-60 V output control switch of the C3-type DC PDU.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Electromechanical Device
921