Huawei SmartAX MA5600T Hardware Description page 858

SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
Filler panels must be installed in the vacant slots in the subrack. Otherwise, heat dissipation of
the boards will be affected.
Description
Table 3-228
Table 3-228 Applicable slots, dimensions, and appearance of filler panels
Slot Appearance (View of the Horizontally Placed Board)
Control board
slot
Power board
slot
Slot for
universal
interface board
l Default configuration:
Service board
slot in the
l Pre-installing cables is required (in future when the ADPE, CAME, or
service
VDPE board is configured):
subrack
GIU slot in the
service
subrack
l Pre-installing cables is not required (same as the filler panel in the
service board slot of the service subrack):
Service board
slot in the SPL
l Pre-installing cables is required (in future when the 48-port or 64-port
subrack
SPL board is configured):
Issue 24 (2018-07-30)
NOTICE
describes the applicable slots, dimensions, and appearance of filler panels.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Board
Dimensions
(W x H)
MA5600T/
MA5603T:
25.40 mm x
395.40 mm
MA5608T:
35.56 mm x
134.84 mm
MA5600T/
MA5603T:
25.40 mm x
105.10 mm
25.40 mm x
183.20 mm
22.86 mm x
395.40 mm
25.40 mm x
197.20 mm
22.86 mm x
395.40 mm
838