Connecting To Water Mains - Blomberg KFD4952XD User Manual

Installation
2. Push the water hose down tightly and connect to
the hose nozzle adaptor.
3. Tighten the connector manually to fix on the hose
nozzle adaptor. You may also tighten the connector
using a pipe wrench or pliers.

3.7. Connecting to water mains

(Optional)
To use the product by connecting to the cold water
mains, a standard 1/2" valve connector must be
installed to the cold water mains in your home. If
the connector is not available or if you are unsure,
consult a qualified plumber.
Refrigerator / User Manual
1. Detach the connector (1) from the tap adaptor (2).
3
2. Connect the tap adaptor to the water mains valve.
3. Attach the connector around the water hose.
4. Attach the connector into the tap adaptor and
tighten by hand / tool.
9 / 38 EN
2
1