Table of Contents
Advertisement
Chapter 2. Displaying Data
2.3.3a
Reading Transducer Signals
3. To read a signal from the meter, click on the [Read Signals] button. (If the meter is a multi-channel instrument,
open the Channel drop-down menu and click on the desired channel.) After a moment, the Properties window
appears similar to Figure 7.
4. To select a different signal type, open the signal menu at the right (shown here with Raw Upstream highlighted)
and click on the desired signal.
2.3.3b
Plotting Transducer Signals
To plot the selected signal, click on [Plot]. A graphical window opens, as shown in Figure 8.
52
Figure 7: Active Signal Options
Figure 8: Signal Graph Window
DigitalFlow™ XGS868i Programming Manual
Advertisement
Table of Contents
