Exiting The Site Edit Menu - GE DigitalFlow XGS868i Programming Manual

C.6.3c Activating Security in the Global Menu (cont.)
3. Enter the current or default Password and click
4. At the Lock Out prompt, click
lock the system.
5. At the Edit Password prompt, click No to leave the password unchanged, or click
IMPORTANT:
Since the default password is printed in this manual, a new password should be entered. If the password
is ever lost, contact the factory for assistance.
6. Enter the New Password and click Yes. Any combination of letters and numbers up to a total of 7 characters may be
used as a password.
7. Verify the New Password by re-entering it and click Yes. Be sure to record the new password in a safe place.
C.7 Exiting the Site Edit Menu
Global
After leaving the
Then proceed to Chapter 3, Operation, of the Startup Guide for instructions on taking measurements, or refer to the
appropriate chapters of this manual for detailed instructions on using the other features of the XGS868i flow
transmitter.
DigitalFlow™ XGS868i Programming Manual
Figure 48: Entering Password
UNlck
to unlock the system and return to the initial
submenu, PanaView returns to the Site Edit Menu. Click [Close] to exit the Site Edit Menu.
Appendix C. Programming the XGS868i Using PanaView™
[Next Item]
.
PROGRAM
menu, or click
YES
to enter a new password.
LOCK
to
131