Displaying Transducer Signals - GE DigitalFlow XGS868i Programming Manual

2.3.3 Displaying Transducer Signals

Along with flow rate data, PanaView enables XGS868i users to read and plot transducer signals from the XGS868i.
1. From the New Meter Browser, highlight the XGS868i.
2. Right-click on the highlighted XGS868i and click on the Properties option, as shown in Figure 5.
The Properties window opens, as shown in Figure 6.
DigitalFlow™ XGS868i Programming Manual
Figure 5: The Properties Option in the New Meter Browser
Figure 6: The Properties Window
Chapter 2. Displaying Data
51