Chapter 2. Displaying Data
2.1 Introduction
This chapter explains how to display measurement data using either of the available methods:
•
LCD Display
- show data on the built-in display
•
PanaView
- display data on a computer terminal using the optional PanaView software
2.2 Displaying Data with the LCD
When equipped with the Liquid Crystal Display (LCD), the Model XGS868i may be programmed to display up to four
variables in sequence. In addition, the contrast of the LCD may be adjusted for optimum viewing. Proceed to the
appropriate section for instructions, and refer to Figure 30 on page 79 of Appendix A, Menu Maps.
2.2.1 Adjusting LCD Contrast
The LCD contrast may be adjusted through the Keypad Program to suit individual needs.
1. Press [Escape]. [Enter], [Escape].
2. In the Keypad Program window, scroll to CNTRS and press [Enter].
3. Scroll to DARKN or LITEN and press [Enter] until the screen shows the desired contrast.
4. When you have achieved the desired contrast, scroll to STORE to retain the setting, or to ABORT to leave the menu
without changing the setting. In either case, the XGS868i returns to the Keypad Program.
5. Then press [Escape] to return to the display screen.
DigitalFlow™ XGS868i Programming Manual
Chapter 2. Displaying Data
43