Siemens RDG200KN Basic Documentation page 124

Supported KNX tools
5
ACS tool
Plant diagram in ACS
124 | 150
The ACS tool offers plant diagrams for easy monitoring and operation of the
thermostat.
To start the application, select Applications ➙ Plant operation ➙ Standard
diagram.
The ACS tool provides standard plant diagrams for RDG2..KN room thermostats,
depending on the following configuration:
Plant type Application
configuration
2-pipe 2-pipe fan coil unit
Control sequence: No impact
–
( P001 = any)
– Fan operation: Enabled (
Chilled/heated ceiling
– Control sequence: Changeover
– Fan operation: Disabled (P350 = 0)
Application
configuration
Single-stage with electric heater
Control sequence: No impact (
–
Fan operation: Disabled (
–
P350 <> 0)
Chilled ceiling
– Control sequence: Cooling only
– Fan operation: Disabled (P350 = 0)
= any)
P001
= 0)
P350
( = 1)
P001
A6V11545892_en--_a