Setting Parameters In Acs - Siemens RDG200KN Basic Documentation

Supported KNX tools
5
ACS tool

5.2.1 Setting parameters in ACS

Note!
122 | 150
In the ACS program, select Plant ➙ Open to open the plant.
To open the parameter settings, select Applications ➙ Plant engineering.
The application and control parameters can be adjusted and downloaded.
Line no. contains the parameter number as displayed in the parameter table. See
Control parameters [➙ 108].
Some parameters in ACS have a range different from that on the room
thermostats.
The thermostat does not accept changes outside its range. This can be seen
online in that a changed value returns to the original value.
Use the ranges described in the parameter tables in Control parameters [➙ 108].
A6V11545892_en--_a