Toro 2024 Directional Drill Software Manual page 8

7. Hold the lower section of the rocker switch
(Figure 32) until the arms extend
Figure 32
Figure 33
8. Release the rocker switch to proceed to the next
step in the sequence
Figure 34
9. Make the pipe connection; refer to Adding Drill
Pipes in the Operator's Manual.
(Figure 33).
(Figure 34).
10. Hold the lower button on the joystick
35) to release the pipe
the button.
g210462
g210528
g210530
8
(Figure
(Figure 36) and release
Figure 35
Figure 36
g210527
g210529