Toro 2024 Directional Drill Software Manual page 13

Maintenance and Parameters Options Screen
Push button 3 on the Settings screen.
Push the up and down arrows to switch between
Maintenance and Parameters.
The Maintenance pin number is 12356.
The Parameters pin number is 73236531.
Language and Units Options Screen
Push button 5 on the Settings screen to access the
screen to switch between English and metric units.
Use the up and down arrow keys to change the
language and unit options.
Figure 50
Figure 51
Screen Settings Screen
Push button 6 on the Settings screen to switch
between zoom delay, brightness, and day or night
mode. Use the up and down arrows to adjust the
parameters.
The Main Drilling Screen zooms into the drilling
functions. These settings adjust the delay on how
long it takes to zoom.
Note:
The SmartTouch ribbon sequence will be
hidden when the screen is zoomed in.
g034783
Clock Settings Screen
Push button 7 on the Settings screen to switch
between the clock options. Use the up and down
arrows to adjust the parameters.
g034767
13
Figure 52
Figure 53
g034773
g034774