Toro 2024 Directional Drill Software Manual page 10

Drilling Fluid (Mud) Use Screen
To access this screen push button 2 on the Hours
screen.
This screen shows the drilling fluid (mud) use of the
machine. Total drilling fluid (mud) cannot be changed.
Daily drilling fluid (mud) can be reset.
1. Reset button
Figure 41
Lubrication and Maintenance Screens
To access this screen, push button 3 on the Hours
screen.
These screens provide the user with the daily
maintenance schedules and the 50-hour, 250-hour,
500-hour, and 1,000-hour increments.
To reset the maintenance interval, navigate to the
Maintenance and Parameters Options Screen (page
13).
Push buttons 5 through 8 for the corresponding
service interval and then push the OK button 3 times.
Push the following buttons to attain the subsequent
maintenance schedule:
•
Button 3—10-hour/Daily maintenance schedule
(Figure 42)
•
Button 5—50-hour maintenance schedule
43)
g204519
•
Button 6—250-hour maintenance schedule
44)
•
Button 7—500-hour maintenance schedule
45)
•
Button 8—1,000-hour maintenance schedule
(Figure 46)
10
Figure 42
(Figure
(Figure
(Figure
g034777