9.
Hold the lower section of the rocker switch
(Figure
17) until the cam assembly rotates to the
selected row under the pipe box
10.
Release the rocker switch to proceed to the next
step in the sequence
(Figure
Figure 17
Figure 18
(Figure
19).
Figure 19
11.
Hold the lower section of the rocker switch
(Figure
18).
in the pipe box and the cam rotates to the home
position
g210462
g210523
12.
Release the rocker switch to start the pull-pipe
process again.
g210526
5
20) until the elevator puts the pipe back
(Figure
21).
Figure 20
Figure 21
g210462
g210525