Probe Temperature Substitution - Blomberg BWOS 30100 Service Manual

BWOS 30100 SERVICE MANUAL

7.14 PROBE TEMPERATURE SUBSTITUTION

1. Disconnect the power supply cord and remove the Oven from the cabinet.
2. Remove the rear covers.
3. To replace the probe, disconnect it and remove the attachment screws.
4. During operation, the ceramic fiber must be around the probe hole.
5. Reinstall the Oven into the cabinet.
6. Reconnect the power supply cord after the Oven is installed.
7. Run the Oven and check all functions.
62