To Set The Clock - Blomberg BWOS 30100 Service Manual

3.4.1 To Set the Clock

1. Press [Set Clock]. The hours will begin flashing and the display will show the
CLOCK writing.
2. Press [+] or [-] to set the desired hour. Continue until correct AM or PM is
selected.
3. Press [Set Clock] again to confirm the hour and minutes will start flashing.
4. Press [+] or [-] to set the desired minutes value, hold the key to change by 10
minute steps.
5. Press [Set Clock] again to confirm the time or wait for 5 seconds.
The following appears when edit mode is active to set or change the value.
BWOS 30100 SERVICE MANUAL
23