Lock Door Motor Switch Substitution Solution - Blomberg BWOS 30100 Service Manual

BWOS 30100 SERVICE MANUAL

7.9 LOCK DOOR MOTOR SWITCH SUBSTITUTION SOLUTION

1. To disassemble the motor see section 7.8.
2. Disassemble the motor by removing the two screws and remove also the brackets.
3. Remove the micro switch by the two screws.
4. Replace the new switch by reversing the previous steps see section 7.8. Pay attention
when positioning and inserting the door lever mechanism into the wheel of the motor.
5. Connect the terminals.
6. The connections must not be loose.
7. Reinstall the Oven into the cabinet.
8. Reconnect the power supply cord after the Oven is installed.
9. Run the Oven and check all functions.
57