Usb Charge Port - Toro Workman GTX Electric & Lithium Service Manual

USB Charge Port

The USB charge port can be used to charge or power
electrical devices that use a USB port. The charge port
has a 5 VDC output and is mounted to the dash (Fig. 27).
If the vehicle wire harness is to be disconnected from the
charge port, note the wire harness connections at the
charge port for assembly purposes. The white wire har-
ness lead should be connected to the positive (+) termi-
nal on the charge port and the black wire harness lead
should be connected to the negative (--) terminal on the
charge port (Fig. 28).
Electrical System
1
1. Dash panel
USB CHARGE PORT
WIRE HARNESS
CONNECTIONS
1. Positive (+) terminal
Page 3A - - 20
2
Figure 27
2. USB charge port
1
2
Figure 28
2. Negative (- -) terminal
Workman GTX Electric