Safety Instructions; Safety Instructions; Supervisor's Responsibilities; Before Operating - Toro Workman GTX Electric & Lithium Service Manual

Safety Instructions

The Workman GTX Electric is designed and tested to of-
fer safe service when operated and maintained proper-
ly. Although hazard control and accident prevention are
partially dependent upon the design and configuration
of the machine, these factors are also dependent upon
the awareness, concern and proper training of the per-
sonnel involved in the operation, transport, mainte-
nance and storage of the machine. Improper use or
maintenance of the machine can result in injury or
death. To reduce the potential for injury or death, comply
with the following safety instructions.
Read and understand the contents of the Operator's
Manual before starting and operating the machine. Be-
come familiar with all controls and know how to stop it
quickly. Additional copies of the Operator's Manual are
available on the internet at www.Toro.com.

Supervisor's Responsibilities

1. Make sure operators are thoroughly trained and fa-
miliar with the Operator's Manual and all labels on the
vehicle.

Before Operating

1. Read and understand the contents of the Operator's
Manual and Operator's DVD before starting and operat-
ing the vehicle. Become familiar with the controls and
know how to stop the vehicle and engine quickly. Addi-
tional copies of the Operator's Manual are available on
the internet at www.Toro.com.
Safety
This safety symbol means DANGER, WARNING,
or CAUTION, PERSONAL SAFETY INSTRUC-
TION. When you see this symbol, carefully read
the instructions that follow. Failure to obey the
instructions may result in personal injury.
To reduce the potential for injury or death, com-
ply with the following safety instructions.
The Workman GTX Electric is an off−highway ve-
hicle only. It is not designed, equipped or
manufactured for use on public streets, roads or
highways.
2. Be sure to establish your own special procedures
and work rules for unusual operating conditions (e.g.
slopes too steep for vehicle operation).
2. Keep all shields, safety devices and decals in place.
If a shield, safety device or decal is defective, illegible or
damaged, repair or replace it before operating the ve-
hicle. Also, tighten any loose nuts, bolts or screws to en-
sure vehicle is in safe operating condition.
Page 1 − 2
WARNING
WARNING
Workman GTX Electric