Rear Brake Caliper Service - Toro Workman GTX Electric & Lithium Service Manual

Rear Brake Caliper Service

2
30 to 35 ft- -lb
(41 to 47 N- -m)
(12.3 to 14.9 N- -m)
1. Brake caliper assembly (LH shown)
2. Caliper slide pin (2 used)
NOTE: Replacement parts for the rear caliper assem-
bly are limited to the brake pad assembly and bleed
screw. If any other caliper components are damaged or
worn, replace the caliper assembly.
Chassis
108 to 132 in- -lb
3. Anti- -rattle spring (2 used)
4. Brake pad assembly
5
Figure 18
Page 5 - - 22
1
3
4
5. Bleed screw
Workman GTX Electric