Yamaha 006IPTO-F0 Owner's Manual page 238

238
Chapter 17—Remote Control
D
ID, SHORT, LONG
These parameters display the channel names. The ID parameter displays the channel ID
(RM01–RM16) for the currently-controlled MIDI device.
E
ON section
This section displays the type of MIDI messages (in hexadecimal or alphabet) assigned
to the [ON] buttons for the currently-selected channels (RM01–RM16).
• LATCH/UNLATCH ..... This button toggles between Latch and Unlatch for [ON] but-
• LEARN .......................... When you turn on this button, MIDI messages received at the
• DATA parameter boxes.......................These boxes display the type of MIDI messages
F
ENCODER section
This section displays the type of MIDI messages (in hexadecimal or alphabet) assigned
to the Encoders for the currently-selected channels (RM01–RM16).
G
FADER section
This section displays the type of MIDI messages (in hexadecimal or alphabet) assigned
to the faders for the currently-selected channels (RM01–RM16).
6 Move the cursor to the desired bank button (BANK parameter buttons 1–4),
then press [ENTER].
7 Press the LAYER [REMOTE 2] button to select Remote Layer 2.
You can now use the MIDI Remote function.
8 Use the faders, Encoders, and [ON] buttons to control the MIDI device.
DM1000 Version 2—Owner's Manual
ton operation.
MIDI IN port are assigned to the DATA parameter boxes.
(in hexadecimal or alphabets) assigned to the
[ON] button).