Yamaha 006IPTO-F0 Owner's Manual page 198

198
Chapter 16—Automix
5 Perform the following operations to punch in and out individual events.
Parameters Channel
Input
Bus Out,
Aux Send
Channel Levels
Stereo Out
(faders)
Group Mas-
ter Fader
Pan
Input
Surround Pan
Input
EQ (F, Q, G)
All channels
EQ On/Off
Aux Sends 1–8 Level
Input
Effects parameters
Effects pro-
(certain
cessors 1–4
parameters)
Faders
User Defined
Remote Layer
Encoders
1. To punch in events by performing this operation, set TOUCH SENSE to TOUCH or LATCH on the Fader1 or 2 page.
2. To punch out events by performing this operation, set TOUCH SENSE to TOUCH on the Fader1 or 2 page.
3. To punch in events by performing this operation, turn on the Auto EQ Edit preference.
4. To punch in events by performing this operation, assign EQ parameters to the Encoders.
6 Stop the Automix.
A confirmation window regarding updating the Automix data appears.
DM1000 Version 2—Owner's Manual
OVERWRITE Operation
Set Layer to Iinput,
Fader mode to Fader
Set Layer to Master,
Fader mode to fader
FADER
Stereo Out fader
Set Fader mode to
fader. Set Group Mas-
ter in User Assign-
able Layer.
Set Layer to Input,
PAN
Encoder mode to Pan
Select Input Layer
and assign Surround
SURR LFE Level or Surround
Pan Wheel to the
Encoders
Use SELECTED
CHANNEL EQUAL-
IZER section. (If EQ
EQ
parameter assigned
to an Encoder, also
use Encoders.)
Set Layer to Input,
Fader mode to Aux
AUX
Set Layer to Input,
Encoder mode to Aux
Select internal effects
—
processors
Select User Defined
FADER
Remote Layer
Select User Defined
PAN
Remote Layer
Punch In
Touch fader knob
Release fader knob
1
and adjust
Press Encoder and
Press Encoder
adjust
Press Encoder and
Press Encoder
adjust
Adjust SELECTED
3
CHANNEL control
Press [SEL] button
Press Encoder and
adjust
Press Encoder and
Press Encoder
4
adjust
Touch fader knob
Release fader knob
1
and adjust
Press Encoder and
Press Encoder
adjust
Move the cursor to Move the cursor to
the parameter con- the parameter con-
trol on the page, trol on the page,
then press [ENTER]. then press [ENTER].
Touch fader knob
Release fader knob
1
and adjust
Press Encoder and
Press Encoder
adjust
Punch Out
2
2
2