• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software.
Studio Manager for 01V96 The CD-ROM supplied with the DM2000 or 02R96 contains Studio Manager for DM2000 and Studio Manager for 02R96 . The CD-ROM supplied with the DM1000 or 01V96 con- tains Studio Manager for DM1000 and Studio Manager for 01V96 .
USBdrv_ 1. For information on using this software, refer to the PDF manual after installation. 2. This software is not supported by Yamaha. Windows System Requirements The system requirements of your operating system may be different to those listed here.
Hard Disk System requirements for software not listed here can be found on the CD-ROM. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide Windows 95, 98, 98SE, Me, NT4.0, 2000, XP Home Edition, XP Professional A Macintosh G3/233 MHz or better and a USB port Mac OS 8.6 to 9.2.2 (Mac OS X not supported)
([DIO/SETUP button on the 01V96) to locate the MIDI/TO HOST Setup page. Under “Studio Manager,” select a port and assign an ID to your Yamaha mixing console. If you are using a serial connection, set the TO HOST SERIAL options as appropriate (i.e., “PC-2” for a Windows PC, or “Mac”...
USB MIDI Driver If you are connecting your Yamaha mixing console to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this driver installed, skip this sec- tion. The procedure you use for installing the Yamaha USB driver depends on which version of Windows you’re using:...
Page 9
Start your computer and Windows, and then insert the included CD-ROM into your computer’s CD-ROM drive. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer.
Page 10
Select “Specify a location,” and specify “D:\USBdrv_” (replacing “D” with the drive letter of your CD-ROM drive), and then click Next. When the driver is located, “YAMAHA USB MIDI Driver” is displayed, as shown below. Click Next. Note: You may be prompted to insert your Windows CD-ROM. Do not insert it! Click OK, and in the “Copy files from”...
Page 11
USB MIDI Driver The driver is installed, and the following window appears when the installation is complete. Click Finish, and then restart your computer. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide...
Page 12
Start your computer and Windows, and then insert the included CD-ROM into your computer’s CD-ROM drive. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer.
Signature Verification, select “Ignore—Install all files, regardless of file signature,” and then click OK. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer.
Page 14
Click OK to close the System Properties window, and then click the Close but- ton to close the Control Panel window. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer.
Yamaha CBX Driver (DM2000/02R96 only) If you’re connecting your Yamaha mixing console to a serial port on your computer, you’ll need to install the Yamaha CBX driver. If you already have this driver installed, skip this sec- tion. Double-click the “Mididrv_” folder on the CD-ROM.
In this case, choose Quit from the File menu to quit the installer, then restart your computer. Copy the “OMS_2.3_Mac.pdf” from the “OMS_” folder on the CD-ROM to the “Opcode:OMS Applications” folder on your hard disk. This file contains information on using and configuring OMS. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide...
USB MIDI Driver If you’re connecting your Yamaha mixing console to a USB port on your computer, you’ll need to install the Yamaha USB driver. If you already have this driver installed, skip this sec- tion. Start your Macintosh, and then insert the included CD-ROM into your com- puter’s CD-ROM drive.
Start your Macintosh, and then insert the included CD-ROM into your com- puter’s CD-ROM drive. Double-click the “SM_” folder on the CD-ROM. Double-click the “DM2000,” “02R96,” “DM1000,” or “01V96” folder as appropriate. Double-click “Install Studio Manager.” Follow the on-screen instructions to install the software.
The “OMS Setup for YAMAHA” folder on the included CD-ROM contains OMS studio setup files preconfigured for use with your Yamaha mixing console. Turn off your Yamaha mixing console, and then use a USB cable to connect its USB TO HOST port to a USB port on your computer.
Yamaha mixing console to Studio Manager or vice versa. See “Synchronizing Studio Man- ager” on page 22 for more information. If no Yamaha mixing console is detected, a new Console window opens.
In order to use Studio Manager, you must specify the input and output ports that Studio Manager should use to communicate with your Yamaha mixing console. Windows: Choose System Setup from the File menu, and specify the input and output ports on the Setup dialog box, as shown below.
Studio Manager communicates with your Yamaha mixing console. Console Device ID: Studio Manager can control any one of up to eight Yamaha mixing consoles, each with its own exclusive ID. Select the ID of Yamaha mixing console that you want to control.
Note: In order to save the current Automix, or the settings of an optional Y56K card, in a Ses- sion, you must resynchronize Studio Manager beforehand (Console–>PC). Note: In order to protect the communication port used by Studio Manager, your Yamaha mix- ing console communication settings (e.g., MIDI, Remote Layer, Machine Control) are not affected by PC–>Console synchronization operations.
USB controller, refer to your computer’s documentation. • Windows: If for some reason installation of the Yamaha USB Driver fails, your Yamaha mix- ing console may be registered as an unknown device and you may not be able to reinstall the driver until the unknown device is deleted.
Page 25
Windows: Suspend will not work if there are any MIDI applications open. • Windows 2000: Depending on your system’s USB controller, suspend and resume may not work properly. If your Yamaha mixing console does stop responding, try disconnecting and reconnecting the USB cable. Studio Manager for DM2000/DM1000/02R96/01V96—Installation Guide...
LIMITED LIABILITY: Your sole remedies and Yamaha’s entire liability are as set forth above. In no event will Yamaha be liable to you or any other person for any damages, includ- ing without limitation any incidental or consequential damages, expenses, lost profits, lost...
Page 27
For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante.