Yamaha 006IPTO-F0 Owner's Manual page 18

18
Chapter 2—Control Surface & Rear Panel
AUX SELECT Section
A [DISPLAY] button
This button displays an Aux-related page (see page 99).
B [AUX 1]–[AUX 8] buttons
These buttons select an Aux Send. When you press a button to select an AUX Send, the cor-
responding button indicator lights up.
ENCODER MODE Section
A [DISPLAY] button
This button displays an Encoder page, enabling you to assign functions to Encoders 1–16
(see page 37). To use a function assigned to an Encoder, press the [ASSIGN] button to turn
on the button indicator.
B [PAN] button
If you press this button, the button indicator turns on and Encoders 1–16 function as chan-
nel panpots.
C [AUX] button
If you press this button, the button indicator turns on and Encoders 1–16 function as chan-
nel Aux Send. The Send destination is selected in the AUX SELECT Section.
D [ASSIGN] button
If you press this button, the button indicator turns on and Encoders 1–16 function as
assignable controls for the parameters assigned on the Encoder pages. (By default, Input
Patches of the corresponding Input Channels are assigned.)
FADER MODE Section
A [FADER/AUX] button
Toggles between the desired parameter to be adjusted by channel faders 1–16. The faders
adjust the Channel or Bus level when the FADER indicator is lit, and adjust the Aux Send
level when the AUX indicator is lit.
B FADER indicator
C AUX indicator
An indicator lights up to indicate the parameter selected via the [FADER/AUX] button.
DM1000 Version 2—Owner's Manual
1 AUX SELECT
DISPLAY
2
1 2 3 4
AUX AUX AUX AUX
5 6 7 8
AUX AUX AUX AUX
1
ENCODER MODE
DISPLAY
PAN AUX ASSIGN
2 3 4
FADER MODE
2
FADER
1
AUX
3