Warning Symbols (Signals) - ABB M2004 System Settings

Safety instructions

Warning symbols (signals)

1.2 Warning symbols (signals)
The different types of warnings are set out in the following chapters according to the
Symbol
explanations table below:
Symbol Name
The safety information in the document must not be interpreted as a guarantee from
ABB that the equipment cannot cause accidents or injury, even if all the safety
instructions have been observed.
4
Meaning
Danger Warning that serious or life-threatening personal injury and/or
!
serious damage to the product will occur if the instructions are
not followed.
Warning Warns of the risk of personal injury or serious damage to the
product. Always follow the instructions that accompany this
symbol.
Electric shock Warns of possible electric shock that can cause life-threatening
or serious personal injury. Always follow the instructions that
accompany this symbol.
Caution Draws your attention to the fact that damage to the product may
occur if an action is not performed or is performed incorrectly.
Static The ESD symbol indicates a risk of static electricity that may
electricity ESD cause serious damage to the product.
Note Information about important parts.
Tips This symbol refers to an instruction providing further information
on a particular step.
3HEA 802352-001 Rev. A